FORUM
Forum Navigation
Files featured in your CNC course
#1 · 25th April 2025, 12:46 pm
Hi Dan,
I was very impressed with your home built MDF lateral clamping system. Do you have files available I could use to make my own?
#2 · 27th April 2025, 10:32 pm
Hi, yes all files used in the lessons can be downloaded under the "exercise files" tab on the relevant lesson. Under module 2 lesson 4 you will find the download for the MFT clamping system.
Cheers
Dan
#3 · 30th April 2025, 1:37 pm
Thanks, I’ll look for it this afternoon. The course is proving very helpful and instructive!
Dan Lee has reacted to this post.
Dan Lee
#4 · 14th November 2025, 2:40 am
Hi Dan did you have a setup file for the Crocodile in Vcarve? I purchased the STl online but would like to have a look at how you set this up in Vcarve
Cheers
Brett Boxhall
#5 · 15th November 2025, 3:36 pm
I am pretty sure I programmed this in Fusion but in any case I can't really share the setup files as I don't own the rights to the STL.